[Advance to content]

Highways Agency Contract Reports

By keyword

50 Reports with keyword 'Stress Analysis':

A machine for the rolling load testing of bridge expansion joints: a design study
University of Reading, 1989

A method for predicting the collapse load of a plate girder when subjected to patch loading in the plane of the web.
University College Cardiff

A parametric study of the ultimate load characteristics of plate girders
University College Cardiff, 1976

A plasticity approach to the assessment of shear in cincrete beam-and-slab structure
University of Cambridge Department of Engineering, 1997

A report on a full scale test on a further girder (MCS2) with a stiffened web subjected to combined shear and bending loads.
University College Cardiff, 1987

A report on five tests carried out on a large-scale, transversely stiffened plate girder - TRV3.
University College Cardiff, 1981

A review of shear strength data with reference to the Woodford Viaduct
University of Westminster, 1998

Acoustic monitoring of ground anchorages: phase 1 - laboratory providing trials
Transport Research Laboratory, 2001

An experiment investigation into shear in large-scale concrete beam-and-slab structures
University of Cambridge Department of Engineering, 1996

An experiment investigation into shear in small-scale concrete beam-and-slab structures
University of Cambridge, 1996

An investigation of the ultimate load behaviour of longitudinally stiffened plate girder webs loaded predominantly in shear.
University College Cardiff, 1983

Assessment version of BS 5400 Part 3: report on draft document
Steel Construction Institute, 1992

Behaviour of stiffeners in small-scale stiffened plates
University of Surrey, 1984

Composite box girder bifurcated bridge project: model conception, design, manufacture instrumentation and testing arrangements.
Imperial College, 1978

Corrosion protection tests on reinforced concrete treated with sil-act silane sealer for Advanced Chemical Technologies Company Oklahoma Cuty, Oklahoma
Wiss Janney Eistner Associates, 1985

Desk study of the ultimate strength and failure modes of composite bridge of short-to-medium span
University of Warwick, 1985

Deteriorated structures
WS Atkins Consultants Limited, 1994

Deteriorated structures
WS Atkins Consultants Limited, 1997

Deteriorated structures: draft final report incorporating flush cover beam tests
WS Atkins Consultants Limited, 2001

Deteriorated structures tests of beams with partly exposed mainsteel series F: cantilevers under distributed loading
University of Westminster, 1998

Deteriorated structures tests of beams with partly exposed main steel series C: restrained beams
University of Westminster, 1999

Early thermal movement and cracking of concrete
WS Atkins and Partners

Elastic buckling of perforated plates under shear
University College Cardiff

Evaluation of low friction bearings under simulated hanger loads : stage 1 - PART 2
Wimpey Laboratories Limited, 1986

Evaluation of low frightion bearings under simulated hanger loads: stage 1 - PART 1
Wimpey Laboratories Limited, 1996

Experimental and theoretical studies on slender plate girders subjected to edge loading
University College Cardiff, 1981

Experimental investigation of transverse stiffeners on webs loaded in shear
University College Cardiff, 1982

Fatigue strength of epoxy resin adhesive joint at elevated temperatures
University of Dundee, 1983

Loading test of a parapet base slab on a reinforced soil wall
Transport Research Laboratory, 2001

Plate failure in stiffened steel
University of Cambridge Department of Engineering, 1973

Preliminary comparisons of TRRL full scale arch bridge load tests with mexe assessments
Transport and Road Research Laboratory, 1989

Report to the department of transport support to drafting of parts 2 of EC3 and EC4. Report on stage 1, to 31.3.93
Steel Construction Institute, 1993

Report to the Department of Transport - support to drafting of parts 2 of EC3 and EC4
Steel Construction Institute, 1993

Research on bridge expansion joints: progress report no. 1
Transport Research Laboratory, 1993

Severn crossing: long trem monitoring of stresses in the deck
Transport and Road Research Laboratory, 1989

Shear strengths of R C beams with defective stirrup anchorages
University of Westminster, 1999

Stiffness and strength of lateral restraints to compresses flanges
University of Warwick, 1996

Stress analysis of bituminous surfaced steel bridge decks
University of Bristol Department of Civil Engineering, 1984

Tests on beams prestressed with unbonde polyaramid tendons
University of Cambridge Department of Engineering, 1991

Tests on beams prestressed with unbonded polyaramid tendons
University of Cambridge Department of Engineering, 1991

Tests on half-scale model concrete bridges: strength calculations for prestressed beam and slab deck
Transport and Road Research Laboratory, 1989

Tests on hanger cables PART II measurement of hysteresis
Wimpey Laboratories Limited, 1986

Tests on plates under Biaxial compression
University of Cambridge, 1983

The application of the 'local approach' to cleavage fracture of ferritic steels and their weldments- a review
The Welding Institute, 1993

The design of transverse stiffeners on webs loaded in shear - an ultimate load approach
University College Cardiff

The effect of traffic loading on masonary arch bridge
University of Reading, 1989

The Scottish Office industry department: draft assessment standards for composite bridges
WS Atkins Consultants Limited, 1994

The use of BS 5400: part 3 for the assessment of bridges
Steel Construction Institute, 1991

The use of BS 5400: part 3 for the assessment of bridges
Steel Construction Institute, 1991

Use of high strength friction grip bolted connections in bridge steelwork
UMIST